Pharmalab India Private Limited

Pharmalab manufactures Pure Steam Generators to meet cGMP requirements. Condensate of this pure steam produced does meet all pharmacopoeia requirements of WFI like USP, IP, BP and JP. The plant is manufactured as per FDA current Good Manufacturing Practices (cGMP) and ASME requirements.

Pure Steam generated from this equipment also surpasses steam quality tests like non-condensable gases, degree of super heat and saturation test as per requirement. Pharmalab has developed improvised equipment for removal of these gases before pure steam is produced.

Features:

• The plant is completely made with AISI 316 L stainless steel with active surfaces electro polished.
• Double tube sheet for heat exchanger and pre-heater.
• Unique in-built degasifying (NCGR) system in the column for removal of non-condensable gases from feed
• water.
• Expanded tube for tube-to-tube sheet joints.
• All contact parts to Pure Steam are electro polished with state-of-the-art technology.
• PLC based operation along with all interlocks and validated logic with skid mounted AISI 304 stainless steel
• control panel.
• Complete documentation to serve international audit requirements.
• Compact design ensures less foot print and shorter column height reduces ceiling height requirement.
• Unique column design requires No additional height for tube bundle removal from top.
• Reduced rouging effect by reduction of pure steam contact surface area within the column.
• Increased life cycle of equipment.
• Ease of maintenance due to reduced working height for pure steam piping and shorter column height.
• Pure steam sampling arrangement with heat exchanger for easy draw of sample in aseptic and safe
• temperature condition.
• The piping system is manufactured with electro polished pipes with orbital welding, sanitary fittings, and
• pharma grade gaskets.
• The insulation is made of Rockwool covered by AISI 304 stainless steel sheet.
• The frame is made of AISI 304 stainless steel.

Pharmalab manufactures Pure Steam Generators to meet cGMP requirements. Condensate of this pure steam produced does meet all pharmacopoeia requirements of WFI like USP, IP, BP and JP. The plant is manufactured as per FDA current Good Manufacturing Practices (cGMP) and ASME requirements.

Pure Steam generated from this equipment also surpasses steam quality tests like non-condensable gases, degree of super heat and saturation test as per requirement. Pharmalab has developed improvised equipment for removal of these gases before pure steam is produced.

Features:

• The plant is completely made with AISI 316 L stainless steel with active surfaces electro polished.
• Double tube sheet for heat exchanger and pre-heater.
• Unique in-built degasifying (NCGR) system in the column for removal of non-condensable gases from feed
• water.
• Expanded tube for tube-to-tube sheet joints.
• All contact parts to Pure Steam are electro polished with state-of-the-art technology.
• PLC based operation along with all interlocks and validated logic with skid mounted AISI 304 stainless steel
• control panel.
• Complete documentation to serve international audit requirements.
• Compact design ensures less foot print and shorter column height reduces ceiling height requirement.
• Unique column design requires No additional height for tube bundle removal from top.
• Reduced rouging effect by reduction of pure steam contact surface area within the column.
• Increased life cycle of equipment.
• Ease of maintenance due to reduced working height for pure steam piping and shorter column height.
• Pure steam sampling arrangement with heat exchanger for easy draw of sample in aseptic and safe
• temperature condition.
• The piping system is manufactured with electro polished pipes with orbital welding, sanitary fittings, and
• pharma grade gaskets.
• The insulation is made of Rockwool covered by AISI 304 stainless steel sheet.
• The frame is made of AISI 304 stainless steel.

Pharmalab manufactures Pure Steam Generators to meet cGMP requirements. Condensate of this pure steam produced does meet all pharmacopoeia requirements of WFI like USP, IP, BP and JP. The plant is manufactured as per FDA current Good Manufacturing Practices (cGMP) and ASME requirements.

Pure Steam generated from this equipment also surpasses steam quality tests like non-condensable gases, degree of super heat and saturation test as per requirement. Pharmalab has developed improvised equipment for removal of these gases before pure steam is produced.

Features:

• The plant is completely made with AISI 316 L stainless steel with active surfaces electro polished.
• Double tube sheet for heat exchanger and pre-heater.
• Unique in-built degasifying (NCGR) system in the column for removal of non-condensable gases from feed
• water.
• Expanded tube for tube-to-tube sheet joints.
• All contact parts to Pure Steam are electro polished with state-of-the-art technology.
• PLC based operation along with all interlocks and validated logic with skid mounted AISI 304 stainless steel
• control panel.
• Complete documentation to serve international audit requirements.
• Compact design ensures less foot print and shorter column height reduces ceiling height requirement.
• Unique column design requires No additional height for tube bundle removal from top.
• Reduced rouging effect by reduction of pure steam contact surface area within the column.
• Increased life cycle of equipment.
• Ease of maintenance due to reduced working height for pure steam piping and shorter column height.
• Pure steam sampling arrangement with heat exchanger for easy draw of sample in aseptic and safe
• temperature condition.
• The piping system is manufactured with electro polished pipes with orbital welding, sanitary fittings, and
• pharma grade gaskets.
• The insulation is made of Rockwool covered by AISI 304 stainless steel sheet.
• The frame is made of AISI 304 stainless steel.

Pharmalab manufactures Pure Steam Generators to meet cGMP requirements. Condensate of this pure steam produced does meet all pharmacopoeia requirements of WFI like USP, IP, BP and JP. The plant is manufactured as per FDA current Good Manufacturing Practices (cGMP) and ASME requirements.

Pure Steam generated from this equipment also surpasses steam quality tests like non-condensable gases, degree of super heat and saturation test as per requirement. Pharmalab has developed improvised equipment for removal of these gases before pure steam is produced.

Features:

• The plant is completely made with AISI 316 L stainless steel with active surfaces electro polished.
• Double tube sheet for heat exchanger and pre-heater.
• Unique in-built degasifying (NCGR) system in the column for removal of non-condensable gases from feed
• water.
• Expanded tube for tube-to-tube sheet joints.
• All contact parts to Pure Steam are electro polished with state-of-the-art technology.
• PLC based operation along with all interlocks and validated logic with skid mounted AISI 304 stainless steel
• control panel.
• Complete documentation to serve international audit requirements.
• Compact design ensures less foot print and shorter column height reduces ceiling height requirement.
• Unique column design requires No additional height for tube bundle removal from top.
• Reduced rouging effect by reduction of pure steam contact surface area within the column.
• Increased life cycle of equipment.
• Ease of maintenance due to reduced working height for pure steam piping and shorter column height.
• Pure steam sampling arrangement with heat exchanger for easy draw of sample in aseptic and safe
• temperature condition.
• The piping system is manufactured with electro polished pipes with orbital welding, sanitary fittings, and
• pharma grade gaskets.
• The insulation is made of Rockwool covered by AISI 304 stainless steel sheet.
• The frame is made of AISI 304 stainless steel.

Pharmalab manufactures Pure Steam Generators to meet cGMP requirements. Condensate of this pure steam produced does meet all pharmacopoeia requirements of WFI like USP, IP, BP and JP. The plant is manufactured as per FDA current Good Manufacturing Practices (cGMP) and ASME requirements.

Pure Steam generated from this equipment also surpasses steam quality tests like non-condensable gases, degree of super heat and saturation test as per requirement. Pharmalab has developed improvised equipment for removal of these gases before pure steam is produced.

Features:

• The plant is completely made with AISI 316 L stainless steel with active surfaces electro polished.
• Double tube sheet for heat exchanger and pre-heater.
• Unique in-built degasifying (NCGR) system in the column for removal of non-condensable gases from feed
• water.
• Expanded tube for tube-to-tube sheet joints.
• All contact parts to Pure Steam are electro polished with state-of-the-art technology.
• PLC based operation along with all interlocks and validated logic with skid mounted AISI 304 stainless steel
• control panel.
• Complete documentation to serve international audit requirements.
• Compact design ensures less foot print and shorter column height reduces ceiling height requirement.
• Unique column design requires No additional height for tube bundle removal from top.
• Reduced rouging effect by reduction of pure steam contact surface area within the column.
• Increased life cycle of equipment.
• Ease of maintenance due to reduced working height for pure steam piping and shorter column height.
• Pure steam sampling arrangement with heat exchanger for easy draw of sample in aseptic and safe
• temperature condition.
• The piping system is manufactured with electro polished pipes with orbital welding, sanitary fittings, and
• pharma grade gaskets.
• The insulation is made of Rockwool covered by AISI 304 stainless steel sheet.
• The frame is made of AISI 304 stainless steel.

Pharmalab manufactures Pure Steam Generators to meet cGMP requirements. Condensate of this pure steam produced does meet all pharmacopoeia requirements of WFI like USP, IP, BP and JP. The plant is manufactured as per FDA current Good Manufacturing Practices (cGMP) and ASME requirements.

Pure Steam generated from this equipment also surpasses steam quality tests like non-condensable gases, degree of super heat and saturation test as per requirement. Pharmalab has developed improvised equipment for removal of these gases before pure steam is produced.

Features:

• The plant is completely made with AISI 316 L stainless steel with active surfaces electro polished.
• Double tube sheet for heat exchanger and pre-heater.
• Unique in-built degasifying (NCGR) system in the column for removal of non-condensable gases from feed
• water.
• Expanded tube for tube-to-tube sheet joints.
• All contact parts to Pure Steam are electro polished with state-of-the-art technology.
• PLC based operation along with all interlocks and validated logic with skid mounted AISI 304 stainless steel
• control panel.
• Complete documentation to serve international audit requirements.
• Compact design ensures less foot print and shorter column height reduces ceiling height requirement.
• Unique column design requires No additional height for tube bundle removal from top.
• Reduced rouging effect by reduction of pure steam contact surface area within the column.
• Increased life cycle of equipment.
• Ease of maintenance due to reduced working height for pure steam piping and shorter column height.
• Pure steam sampling arrangement with heat exchanger for easy draw of sample in aseptic and safe
• temperature condition.
• The piping system is manufactured with electro polished pipes with orbital welding, sanitary fittings, and
• pharma grade gaskets.
• The insulation is made of Rockwool covered by AISI 304 stainless steel sheet.
• The frame is made of AISI 304 stainless steel.

Pharmalab manufactures Pure Steam Generators to meet cGMP requirements. Condensate of this pure steam produced does meet all pharmacopoeia requirements of WFI like USP, IP, BP and JP. The plant is manufactured as per FDA current Good Manufacturing Practices (cGMP) and ASME requirements.

Pure Steam generated from this equipment also surpasses steam quality tests like non-condensable gases, degree of super heat and saturation test as per requirement. Pharmalab has developed improvised equipment for removal of these gases before pure steam is produced.

Features:

• The plant is completely made with AISI 316 L stainless steel with active surfaces electro polished.
• Double tube sheet for heat exchanger and pre-heater.
• Unique in-built degasifying (NCGR) system in the column for removal of non-condensable gases from feed
• water.
• Expanded tube for tube-to-tube sheet joints.
• All contact parts to Pure Steam are electro polished with state-of-the-art technology.
• PLC based operation along with all interlocks and validated logic with skid mounted AISI 304 stainless steel
• control panel.
• Complete documentation to serve international audit requirements.
• Compact design ensures less foot print and shorter column height reduces ceiling height requirement.
• Unique column design requires No additional height for tube bundle removal from top.
• Reduced rouging effect by reduction of pure steam contact surface area within the column.
• Increased life cycle of equipment.
• Ease of maintenance due to reduced working height for pure steam piping and shorter column height.
• Pure steam sampling arrangement with heat exchanger for easy draw of sample in aseptic and safe
• temperature condition.
• The piping system is manufactured with electro polished pipes with orbital welding, sanitary fittings, and
• pharma grade gaskets.
• The insulation is made of Rockwool covered by AISI 304 stainless steel sheet.
• The frame is made of AISI 304 stainless steel.

Pharmalab manufactures Pure Steam Generators to meet cGMP requirements. Condensate of this pure steam produced does meet all pharmacopoeia requirements of WFI like USP, IP, BP and JP. The plant is manufactured as per FDA current Good Manufacturing Practices (cGMP) and ASME requirements.

Pure Steam generated from this equipment also surpasses steam quality tests like non-condensable gases, degree of super heat and saturation test as per requirement. Pharmalab has developed improvised equipment for removal of these gases before pure steam is produced.

Features:

• The plant is completely made with AISI 316 L stainless steel with active surfaces electro polished.
• Double tube sheet for heat exchanger and pre-heater.
• Unique in-built degasifying (NCGR) system in the column for removal of non-condensable gases from feed
• water.
• Expanded tube for tube-to-tube sheet joints.
• All contact parts to Pure Steam are electro polished with state-of-the-art technology.
• PLC based operation along with all interlocks and validated logic with skid mounted AISI 304 stainless steel
• control panel.
• Complete documentation to serve international audit requirements.
• Compact design ensures less foot print and shorter column height reduces ceiling height requirement.
• Unique column design requires No additional height for tube bundle removal from top.
• Reduced rouging effect by reduction of pure steam contact surface area within the column.
• Increased life cycle of equipment.
• Ease of maintenance due to reduced working height for pure steam piping and shorter column height.
• Pure steam sampling arrangement with heat exchanger for easy draw of sample in aseptic and safe
• temperature condition.
• The piping system is manufactured with electro polished pipes with orbital welding, sanitary fittings, and
• pharma grade gaskets.
• The insulation is made of Rockwool covered by AISI 304 stainless steel sheet.
• The frame is made of AISI 304 stainless steel.