Barrier Isolators And Integrity Testing Device

WirelessGT is the most advanced and fully automated glove leak testing system, according to cGAMP, with pressure decay measurement for isolators and RABS in the Pharmaceutical industry. Operation is simple and without tubes and wires. All the functions necessary for performaning a reliable glove test are integrated in the battery-powered test cover. The test monitors the pressure loss of the glove/sleeve assembly over a defined time. More than 1000 SKAN glove test covers have already been sold.

FEATURES

• Wireless transmission to PC
• Testing time from 15 minutes, depending on glove material and accuracy required
• Specific test recipes for different types of glove
• User-friendly operation, cGMP compliant testing
• Safe recognition of the tested glove port by RFID
• Detects holes larger than 100 microns
• Suitable for use in clean rooms
• Test pressure up to 3000 Pa
• All gloves in an isolator can be tested simultaneously
• In situ testing without removal of the glove

WirelessGT is the most advanced and fully automated glove leak testing system, according to cGAMP, with pressure decay measurement for isolators and RABS in the Pharmaceutical industry. Operation is simple and without tubes and wires. All the functions necessary for performaning a reliable glove test are integrated in the battery-powered test cover. The test monitors the pressure loss of the glove/sleeve assembly over a defined time. More than 1000 SKAN glove test covers have already been sold.

FEATURES

• Wireless transmission to PC
• Testing time from 15 minutes, depending on glove material and accuracy required
• Specific test recipes for different types of glove
• User-friendly operation, cGMP compliant testing
• Safe recognition of the tested glove port by RFID
• Detects holes larger than 100 microns
• Suitable for use in clean rooms
• Test pressure up to 3000 Pa
• All gloves in an isolator can be tested simultaneously
• In situ testing without removal of the glove

• Pay Mode Terms: T/T (Bank Transfer),Other

Collaboration solution of SKAN and Pharmalab

The Sterility Test Isolator SKANFOG® STI is the most advanced isolator for testing pharmaceutical samples for sterility (STI). Installation in labs and an accelerated decontamination time are facilitated by the once-through air handling system and the integrated catalytic converter for H2O2. The availability of the isolator has improved substantially, so a high testing frequency can be obtained.

SKANFOG® STI is manufactured in India with SKAN's technology and expertise.

 

Customers needs

• Sterility testing in an aseptic environment for perfect test results
• Fast and easy testing performance
• Quick installation in the laboratory
• Low running costs compared to clean room operations

 

Features:

• Fast decontamination cycle of the chamber
• Integrated catalytic converter to break down H2O2 – no HVAC installation required
• Safe change return air filter: isolator is suitable for testing hazardous products

 

Bright range of Services

• Complete documentation according GAMP 5.0
• Installation and commissioning
• Isolator qualification IQ/OQ
• Decontamination cycle development
• Microbiological qualification
• Documented operator training

SKANFOG VAC is an airlock with integrated SKAN-FOG technology for a fast and gentle bio-decontamination with H2O2. The pre-vacuum ensures the infiltration of the hydrogen peroxide for to all surfaces and dead spots in the load.

Features:

• Automatic leak test before each transfer.
• The doors are pneumatically sealed for an excellent tightness and interlocked to avoid operator failure.
• H2O2 depletion is reached by vacuum pulsing
• Very low H2O2 consumption